Decklink Sync Config [fixed]
I'm running the current Millumin 5 version, and have tested on Millumin 4.
I have a Decklink 8K Pro Gen 2 in a Helios 3 enclosure.
I've made a single canvas that's 7680*4320, and setup Video Routing with Many Canvases to 1 Output at that res. I've sliced the canvas into 4 slices on that Routing layout and because I only have HD led processors in the shop right now, am sending to a 2160p30 output to the Decklink.
In BM Desktop Video, I've set port 1 to SDI 1 to 4 In and Out, to both 8K30 and 4320p30, Quad Link, SQ format
Side by side on the LED, the two signals are out of step with each other, they come and go.
Playback is on an M3 Ultra with some extra ram.
Am I missing something to get the benefit of the decklink card for syncing 4 outputs? I only need 2 for this buuuut...
Comments
It seems I was missing enabling "input sync" on the LED processors. Not running a sync generator, just enabling that setting in menu under Advanced/Advanced