I have noticed that both Millumin 4 and 5 have this issue. Switching between local files works well, but there is a noticeable delay in switching between local and acquisition signals.
Could you please test it using materials with a significant contrast? I have tested it again. Out of 10 trials, the signal was delayed 8 times. Thank you
I have changed my computer and the version, but the problem still persists
My solution is to add a 0.3 millisecond delay to the collected signal,
I tested several times, and I could not reproduced your issue. The "keep hot" option is especially there to avoid such an issue.
Is it possible to send us a TeamViewer session ? Or anything that could help us to reproduce your problem (project file, specifications of the machine, ... but a TeamViewer or equivalent is the best for sure) ?
Comments
Hello @lchaudio,
I can see your problem on your video, despite you activate the "keep hot" option.
However, I cannot reproduce the problem : would it be possible to send us a TeamViewer session, so we could check your issue ? Thank you.
Best. Philippe
Thank you for responding to my question
Could you please test it using materials with a significant contrast? I have tested it again. Out of 10 trials, the signal was delayed 8 times. Thank you
I have changed my computer and the version, but the problem still persists
My solution is to add a 0.3 millisecond delay to the collected signal,
Hello @lchaudio,
I tested several times, and I could not reproduced your issue. The "keep hot" option is especially there to avoid such an issue.
Is it possible to send us a TeamViewer session ? Or anything that could help us to reproduce your problem (project file, specifications of the machine, ... but a TeamViewer or equivalent is the best for sure) ?
Best. Philippe