›

Millumin 4 and 5 input signal delay

lchaudiolchaudio
in MAIN

Millumin 4 and 5 input signal delay

I have noticed that both Millumin 4 and 5 have this issue. Switching between local files works well, but there is a noticeable delay in switching between local and acquisition signals.

Comments

  • MilluminMillumin

    Hello @lchaudio,

    I can see your problem on your video, despite you activate the "keep hot" option.

    However, I cannot reproduce the problem : would it be possible to send us a TeamViewer session, so we could check your issue ? Thank you.

    Best. Philippe

  • lchaudiolchaudio

    Thank you for responding to my question

    Could you please test it using materials with a significant contrast? I have tested it again. Out of 10 trials, the signal was delayed 8 times. Thank you

    I have changed my computer and the version, but the problem still persists

    My solution is to add a 0.3 millisecond delay to the collected signal,

  • MilluminMillumin

    Hello @lchaudio,

    I tested several times, and I could not reproduced your issue. The "keep hot" option is especially there to avoid such an issue.

    Is it possible to send us a TeamViewer session ? Or anything that could help us to reproduce your problem (project file, specifications of the machine, ... but a TeamViewer or equivalent is the best for sure) ?

    Best. Philippe

Sign In or Register to comment.