›

Layers to beamers

francescofrancesco
in MAIN
Hello I ´m using Millumin with two beamers (same brand & resolution) and a Mac Pro with several vidéo outputs.
Is it possible to attribue a layer to a beamer specifically ?
For instance :

Layer 1 > beamer A
Layer 2 > beamer B

I don't want to split ONE image on two screens. I want to use TWO different images on each screen with their own attributes (Mapping, Fx, etc...)

Im using now Madmapper through the Syphon to do this.

Can I do this directly through Millumin ?
Thks in advance for your answer.

Francesco

Comments

  • deuzairdeuzair
    edited January 2015
    Hi Francesco,

    Each layer has its own position properties, so the short answer is yes you can.

    e.g. for two projectors, each is 1280x720
    1. Setup Output : Custom 2560x720
    2. Multiscreen : Number of screen 2. Assign each screen to a physical output
    3. Use one layer with position x : -720
    4. Use one other layer wit position x : 720
    I hope it helps,

    renaud
  • Manu44Manu44
    Hi
    It's -640 and +640 (1280/2)
    Manu
  • deuzairdeuzair
    Oups... You.re right Manu, I wrote to fast.

    Pos x have to be set to -640 for the first layer and 640 for the second one
  • Manu44Manu44

    :)
  • francescofrancesco
    Hello Renaud & Manu,
    Thanks a lot for your quick help.
    It works very well.
    It's even more easy than I thought : when the 2 beamers are connected to the Macpro, Millumin recognizes them and attributes automatically a layer per screen. Great !

Sign In or Register to comment.