Two sync outputs on M1 Max
On a job, where I used Millumin on a Macbook Pro M1 Max, I had two outputs driving one led.
The problem is that on their union it was noticeable that they were not in sync.
I did some research and discovered that on this processor it is not possible to have a sync...
Since I will have to do another job where two video projectors will be blended together...
I was wondering, have they solved this problem on macs with M2 or M3 processors?
Thank you
Comments
Hello @mariospinaci,
Short answer : no.
To get frame-sync outputs, you can use a wall controller or a Blackmagic card . More info in this article.
Best. Philippe
Thanks