How to control shutter for low ansi projector with millumin.
Yes it's me again. : )
I often use projectors that support pjlink.
EB-L25000U(EPSON), PT-RZ21K(Panasonic), PT-DZ21K2(Panasonic), PT-EX12K(Panasonic),
PT-DW11K(Panasonic), PLC-XM6000(SANYO), PT-EX800Z(Panasonic), PT-EX600E(Panasonic)
I mainly use these projectors,
I use two computers as main com and backup com when controlling this.
just in case.
So, in the "STRING MODE" of "DATA TRACK", enter "%1AVMT 3[INT_VALUE]|r" and adjust the value(1 or 2).
And it works equally well on the main, backup computer at the same time from the high ansi projector(11K~30K ansi)
However, below 10K ansi projectors don't work.
I wondered if it was a projector problem and I also tested it at Watchout, and it worked well.
Of course, I can use "PJLINK MODE" of "DATA TRACK" or "MIDI REMOTE PROJECTOR CONTROL" app.
However, this function cannot be used for main, backup computer at the same time because of a crash.
Is there any way to solve this?
I need your wisdom!!