PJ LINK DATA TRACK
I downloaded v3.14 and tested Data Track in PJLink mode to drive the shutters of 2x PT RZ970.
It's working quite well, except : as the communication is closed after a while (isn't it?), when nothing happen in my show for a few minutes (it's a theater show, so...) some command are not working, even if they work normally when I just read the cues quickly with no break.
When I read it in its real tempo, sometimes it works sometimes not.
For the "shutter open" command, I created an empty cue to call twice the link (one in that empty one, and then again, rewriting the command and address in the show cue), it's quite better, but not working at each time.
And for the "shutter close" command, it's not a solution obviously, because i'd need to close the shutter right after the effect... (the fade out is in the shutter mode of the beamer in that case, which is not a problem when there is no long time between the cues...)
As far as I know, with some softwares when you write the pjlink command to the beamer you can write a first call and right away, with a milliseconds delay the command you want...
Is Millumin doing that invisibly?
If I don't have a solution for it to be stable, I'll have to switch to another solution to talk to my shutters, but that one would be great, because one of the easier...