Batchku
About
- Username
- Batchku
- Joined
- Visits
- 12
- Last Active
- Roles
- Member
Activity
-
Batchku commented on a discussion.psi have also tried the USB BlackMagic Video Recorderhttp://www.bhphotovideo.com/c/product/558914-REG/Blackmagic_Design_VIDREC_Video_Recorder_USB_Capture.html
this device works with the blackmagic video recorder app, but again i can't get the video into Millumin.
any thoughts?
aliSeptember 2014 -
-
-
Batchku commented on a discussion.Thank you philippe, nice solution.I'm hoping to use a more robust/scalable streamer server, like the quicktime broadcaster (which appears broken under 10.9.2!) or the darwin streaming server. are you aware of any possible connections for them?
thanks,aliJune 2014 -
-
-
-
-
Batchku commented on a discussion.hello,
i'm also working with some black magic hardware (UltraStudio Express and UltraStudio Mini Recorder), trying to get 1080i 60 video from a Sony NEX-5 into Millumin; no luck. I see the "UltraStudio Mini Recorder BMD" under sources but no video comes through. I have all the blackmagic software installed and the devices *is* recognized by their software.
is there still need for some secret app that allows this to work? is it posted somewhere?
aliFebruary 2014 -
-
-
Batchku commented on a discussion.I see now; there was an error in the OSC doc, under "If the media is a Quartz patch, you can control the parameters :"
it says:/millumin/layer/media/quartz/param1 0.5it should say/millumin/layer/media/quartz/param1/0 0.5so all better now.thanks philippe!
aliFebruary 2014 -
Batchku commented on a discussion.here's a followup question:how can i address my quartz composer parameters with OSC if the QC composition is placed in the layer in the board as opposed to being used as an effect; here's what i mean:
https://www.dropbox.com/s/dxm36iueoz9oe6f/Screenshot 2014-02-16 15.12.10.png
aliFebruary 2014 -
Batchku commented on a discussion.hello,the direct from max solution is working.the GUI in millumin for the effects does NOT update; this was making it difficult to tell if thing were working.
on the other hand, i find layer numbering to be confusing; what happens if i take the default "layer 1" and rename it "layer 2", and then make a new layer? are the OSC layer numbers always the original creation order layers?
thanksaliFebruary 2014 -
-