SorenBcn

About

Username
SorenBcn
Joined
Visits
27
Last Active
Roles
Member

Activity

  • SorenBcn commented on a discussion.
    and there was something I overlooked  -
    osc has to be activated in order for milluplug to receive anything from millumin.Now I will never forget ;-)
    December 2014
  • SorenBcn commented on a discussion.
    ok, sorry for not speaking direct enough -
    All of a sudden Milluplug does not detect anything from Millumin and in my case convert it to a midi command.However testing the midi command from milliplug works fine.
    Though I had it working everyday during 19 days and haven't been changing anything.
    I have noticed that milliplug has  'to milluplug' in source and 'from milluplug' in destination - just a wrong naming?

    I have tried now to from 3 different macs (osx 10.8.5 and 10.9.5, milluming 1.50 and 1.53, milliplug 1.21)I cannot make milluplug receive anything from millumin. So I am wondering if there is a step I have overseen?
    December 2014
  • SorenBcn started a discussion.
    December 2014
  • SorenBcn commented on a discussion.
    I mean, adding a quickitme with up to 8 audio tracks (I have better experience with using quicktime with audio only than i.e. a wav file i millumin) plays out fine?
    October 2014
  • SorenBcn commented on a discussion.
    Ok thanks.
    And is it fairly easy to make work with millumin?
    October 2014
  • SorenBcn started a discussion.
    October 2014
  • SorenBcn commented on a discussion.
    Thanks for the latency tests @CitizenCaine 
    October 2014
  • SorenBcn commented on a discussion.
    I am late to the 'party'. Here are my experiences with stacking:
    When stacking projectors best results are achieved using same type of projectors with the same type of lens.( it is implicit that  the projectors has lens shift - if you can remote control them via a web interface even better)One note - It if very difficult to achieve good results with short throw lenses and stacking. Even with certified stacking short throw lenses from i.e. christie it is hard to archive good results fast.
    Use a dvi / vga / hdsdi distributer for handling the signal since you want to send the same to all the projectors.(and save precious cpu/gpu cycles for the show )
    Like @lotech said, use it for flat surfaces only. 
    Best regardsSøren
    October 2014
  • SorenBcn commented on a discussion.
    Just to clarify,  my strange issue got resolved  - 1.48 is working just fine both on 10.8.5, 10.9.2 a 10.9.3 for me.
    June 2014
  • SorenBcn commented on a discussion.
    how is the latency on the Epiphan DVI2PCI / Pro cards?
    May 2014
  • SorenBcn commented on a discussion.
    just like when in a mac pro (pre 2013).I am a bit surprised if BMD doenst recommend it now. Their drivers are certified for thunderbolt use and their tech support back in the day confirmed compatibility using multiple pcie card inside one computer/TB box.Maybe they discovered something?I any case i haven't experienced any glitches with out without an external enclosure (with intensity pro)
    May 2014
  • SorenBcn commented on a discussion.
    I have been using a sonnet echo expres II with 2x intensity pro  and it works perfectly stable and as expected.
    May 2014
  • SorenBcn commented on a discussion.
    Perfect Philippe
    Thanks for the swift answer - the idea is to use a D700 configuration (just in case) :-)

    Cheers,Søren
    March 2014
  • SorenBcn commented on a discussion.
    Can Millumin handle a 8640x1920px stage?- using a new Mac Pro (8x1080x1920) with  2x Datapathx4 configured as 2x 4x1 (8x1) portrait.
    Cheers,Søren
    March 2014