›

Adding ATEM Device

DigitalCandelaDigitalCandela
in MAIN

Hello!

I am trying to add an ATEM device from a data layer. When I'm taken to the Network tab of the Devices module, I click the "+" icon and select "ATEM Device". The IP that populates (192.168.0.7) is a different range than the one of my adapter (10.1.10.xx; Wi-Fi is disabled). When I insert the IP of the ATEM (10.1.10.11) and press "reconnect", it instantaneously replaces the IP I just typed with the original value (192.168.0.7) and fails to connect.

In terminal, I can ping the ATEM and there are no failures.

Anyone know what I'm doing wrong here?

Comments

  • MilluminMillumin

    Hello @DigitalCandela,

    I guess your text-field is not validated when you click on the reconnect button : do not click on this button directly, press ENTER or change the focus for another UI component, so the text-field gets validated with its new value.

    This behavior will be fixed for next Millumin update.

    Best. Philippe

  • DigitalCandelaDigitalCandela
    edited September 11

    Pressing enter worked!

    Thanks, Philippe!

Sign In or Register to comment.