DMXis by ENTTEC does not work

PieterMarnef

Hi,

I have a DMXis-hardware module, but I cannot connect the thing to Millumin.

The module is properly connected to a Macbook Pro. When I open the Entecc DMXIS-software, I can control the different channels with the software of Enttec.

In Millumin in the Device Manager, I added a DMX Device, but the column "serial" stays empty.

When I press the "i" button, the "Open-DMX Device" is disabled beceaus DMXIS of Enttec is not en open-DMX-device. When I enable it (just to try things out, nothing happens).

What am I doing wrong?

Thank you so much,

Pieter

Millumin

Hello @PieterMarnef,

DMXis is both a software and hardware and they are meant to work together.

Please note we didn't listed as a supported device in this article.

However, it seems possible to change the DMXis USB hardware, so it works like a standard USB DMX device.

I found this thread on QLC's forum, where it shows how to make such a change with Pro Manager : https://www.qlcplus.org/forum/viewtopic.php?f=24&t=6801&start=20#p46566

Best. Philippe