›

Artnet disconnection

Hieros_GamosHieros_Gamos
edited February 22 in MAIN

Hello, I'm on Mac, 12.7.6, with last Millumin update.


I've got an ARTNET from Garage Cube with 8 universes. Works perfectly well with MadMapper. But in Milumin, I just can get only DMX sending (DMX TRACK or animate Light Layers) working for JUST 3 SECONDS (no more).


Strangely, it doesn't work anymore after this 3 seconds... Just staying on the last command, until I switch on an another network profil with an other address. Then 3 seconds seconds later... You've got the point.


Also, when I create only a light (5 @4) for luminosity, not DMX track or anything else, it just doesn't work. I can move the slider, just do nothing.

I'm already in "Artnet mode".


What I'm doing wrong ?

Comments

  • Hieros_GamosHieros_Gamos

    Edit : On "Light", I can control manually, but just within 3 seconds...

  • MilluminMillumin

    Hello @Hieros_Gamos,

    This is strange indeed.

    When the Artnet does not work any more, is the icon of Artnet "red" or "green" in the device-panel (CMD+K) ?

    What is the version of Artnet used by the controller (Millumin supports Artnet V1/V2, Artnet V3/V4 should be also supported because it is retrocompatible) ?

    Best. Philippe

  • Hieros_GamosHieros_Gamos
    edited February 22

    The icon Artnet is always in green in the device panel.


    I've tried to match my Artnet with the only channel who is in green on the unicast (192.168.1.197) but nope. Get back to my farmer adress 192.168.1.201).


    Tried with "local host" / "default" / "WIFI" / "USB" (my Artnet)... Nope.

    But work like a charm with my USB Enttec Pro.


    I've tried to make a network profile with the first adress. Or even tried with the "Automatic" network profile. Same : until I change the network profile, it get "freezed" after 3 seconds...

  • MilluminMillumin

    Hello @Hieros_Gamos,

    Thank you for the info.

    • Please use without unicast set in Millumin : does the problem persists ?
    • Also, test without your Artnet controller, but simply with another computer running Millumin : can the second Millumin see the Artnet coming in (use the Monitor) ?
    • If the problem persists, please send us a TeamViewer session.

    Best. Philippe

  • Hieros_GamosHieros_Gamos

    Hello, I got time to make tests again :

    • I have tried with the unicast set. It doesn't work.
    • I've tried with my another MacBook Pro : the second Millumin can see the Thunderbolt RJ45, and it's green. But I have no control at all, even within the 3 seconds before the "freeze" of the DMX data.
    • It persist. I will send you a TeamViewer session.

    Thanks !

Sign In or Register to comment.