- Last Active
Hello again. Today i had the chance to do some tests. So the main problem is that i can have 1 syphon output. So it's not helping if i run 3 or 4 instances of millumin (1 for each projector).
What i want to do is:1.Run Millumin 1 for the 1st projector --> Syphon Out Screen 12.Run Millumin 2 for the 2nd projector --> Syphon Out Screen 23.Run Millumin 3 for the 3rd projector --> Syphon Out Screen 34.Run Millumin 4 using the other 3 Syphon Outputs.That will help me to manipulate each projector separately and then (when everything is set) to run the whole project through Millumin 4 using the Syphon Outputs.
So when i use "Toggle Syphon Output" i only get the output of 1 screen/projector.
Any ideas how i could do that?
Thank you againJuly 2014
So i see, you need the Apple Mini DisplayPort to Dual-Link DVI adapter and a usb hub.Thanks for that also @citizencaineJune 2014
So @citizecaine with the new mac pro you cannot connect, par example, 2 DVI monitors and 4 VGA??Cause on my next big project -this is not a big project ): - i was considering buying the upgraded mac pro just for that!June 2014
Hello again @citizencaine,
So you think it would be better to have a triplehead2go than using my graphic card for all outputs?
I will use a mac pro using a gtx 680 mac edition card (4 outputs- 2xDVI, HDMI, Display port).Here are the specifications for the card:Base Clock: 1006 MHZBoost Clock: 1058 MHzMemory Clock: 6008 MHz EffectiveCUDA Cores: 1536Bus Type: PCI-E 2.0Memory Detail: 2048MB GDDR5Memory Bit Width: 256 BitMemory Speed: 0.33nsMemory Bandwidth: 192.26 GB/sJune 2014
@CitizenCaine yes that would be great! But they've got some awful home projectors (3000 L) that's why I have to do the stacking. The only good thing about them is that they are new.June 2014
@vbaudron it will not be enough through the projectors. As I said its a concrete floor 10x25 meters. I've got 3 identical projectors equipped with 0.9 lens. The height of the ceiling is 8 meters. So the keystone of my projection will be quite huge and the inboard correction won't be enough I think @CitizenCaine (what a perfect nickname)June 2014
@lotech I;m going to project on a cement floor 10x25 meters long.. I know it will be oyt of focus at some point but it's not a problem. Although i would like to have the same image.June 2014
@Lars thank you very much! I'll test it on Monday were my gtx 680 will be delivered.
Thnxz againJune 2014